• Comm7 Utility Software
    Comm7 is a Windows-based diagnostic utility created by Watlow. Comm7 can be used to upload/download controller configurations or log data to a text file via RS-232.
    (Windows 3.x/95/98/XP).
  • Modbus Reader 2 (MBReader2.exe) Utility Software
    MBReader2 is a Windows-based diagnostic utility created by Watlow. MBReader2 can be used as a digital communications diagnostic tool for dual packet (handles floating point data) Modbus RTU protocol instruments like the model PM controller.
  • PM Configurator Software
    Configurator software is used to configure, create or edit configurations files or download configuration files from your PC to the PM controller family
  • HP VEE Through ModBus
    Using a HP VEE Program to Control your Instrument through Modbus RTU protocol
  • HP VEE Executable Programs (Self-Extract Zip File 151 KB)
     Executables HP VEE programs for better testing (set up, plotting, data logging and PID setting)
  • F4 Set Up (Text File 15 KB)
    Use Comm7 program to upload the default factory parameters into the F4 controller for MRTP.
  • Series 96 Set Up (Text File 1 KB)
    Use Comm7 program to upload the default factory parameters into the 96 controller.
  • GPIB Communications Utility Programs (Self-Extract Zip File 62 KB)
    Executables HP VEE programs for testing the GPIB Communications and setting up the board (4804,4806,4809 and 4819),

  • Modbus RTU Protocol Programming in Visual Basic (Self-Extract Zip File 61 KB)
    The Modbus Communications Example demonstrates the sort of routines necessary to communicate to a temperature controller through the Modbus protocol using a program written in Visual Basic.

  • LabVIEW Communications Testing Program (Vi File 30 KB)
    This program enables to write and read single commands to the temperature controller through Serial or GPIB Communications.